The mobile format is our core range: a complete containerised cold room — insulated, fitted with its refrigeration unit and pre-charged with R290 — set down on your slab and connected to 3-phase 400 V. Turnkey delivery across France, Germany, Italy and Spain.
A mobile cold room is the opposite of a built structure. No site works, no panels to assemble, no months of coordination. The container arrives on a crane lorry, is set down on a concrete slab or levelling feet, connected electrically, and runs the same day. It is the format that transforms life for seasonal operations (game, events, market gardening) and for anyone who wants to avoid a building project (butchers relocating, restaurants under refurbishment).
Three situations make mobile unbeatable. First: you are short on time — a game season starting in September, a market opening in April, a fixed-term contract. Second: you want to protect your property assets or you rent your premises — the container is movable plant, so it is depreciable and relocatable. Third: your need is seasonal or variable — you can resell the unit, mothball it, or even hire it out to a peer in the off-season.
All our models ≤ 30 m³ are delivered pre-charged with R290 (propane), a natural refrigerant with a GWP of 3 — against the 1,400 to 3,900 of the HFCs that F-Gas regulation is progressively phasing out. Above 30 m³ the propane charge exceeds the ATEX threshold in an enclosed space: we then deliver the room empty and our network of certified F-Gas engineers carries out on-site charging (R290 or R744 to spec). More logistics, but compliant and durable.
Factory lead time to mainland Europe: 8 to 12 weeks from signing, covering manufacture (3-4 weeks), sea freight (4-5 weeks), customs clearance (1 week) and inland delivery. A crane lorry (HIAB) is required for unloading — we supply the lifting arm with 5 days' notice. A 15 cm reinforced concrete slab is recommended for 20 m³ and above; steel levelling on stabilised ground is acceptable for a 10 m³.
| Volumes available | 10 / 20 / 30 / 40 m³ · bespoke up to 80 m³ |
| Temperature ranges | +2 / +10 °C (chiller) · −18 / −25 °C (freezer) |
| Refrigerant | R290 pre-charged ≤ 30 m³ · R290/R744 empty above |
| Insulation | PIR sandwich panels 100 mm (chiller) or 120 mm (freezer) |
| Electrical | Single-phase 230 V (10 m³) · 3-phase 400 V (20 m³ and above) |
| Delivery | France, Germany, Italy, Spain · 8-12 weeks from factory |
| Deposit | 50% at order, balance on delivery |
| Warranty | 2 years transferable, backed by CGGK importer |
The 10 m³ (roughly 350 cu ft) is our entry point: the most compact small cold room that still works as a genuine professional unit. It arrives pre-charged with R290, runs on a standard 230 V single-phase supply, and can be sited almost anywhere without a heavy concrete slab. A best-seller for game-hunting groups, small butchers, florists and restaurants on temporary premises.
From 5,800 € ex VAT
View detailsThe 20 m³ (roughly 700 cu ft) is our best-seller. It has the capacity for a wholesale butcher, an active hunting syndicate, a mid-sized restaurant or a market garden handling post-harvest stock. Pre-charged with R290, 100 mm PIR insulation, 400 V three-phase. This is the format where the cost per m³ is at its best.
From 8,200 € ex VAT
View details30 m³ (roughly 1,060 cu ft) is the boundary of our pre-charged R290 catalogue. It is the format for farms handling post-harvest stock, caterers with large seasonal volumes, wholesale butchers and shared hunting estates. Above this point we switch to empty delivery, with the unit charged on site by a certified F-Gas engineer.
From 11,500 € ex VAT
View details
40 m³ of usable space (roughly 1,410 cu ft) on an ISO 40-foot frame. Aimed at food manufacturers, large producers and logistics platforms. Always delivered empty, then charged on site by a certified, Category I F-Gas engineer (R290 or R744, depending on the specification).
From 17,800 € ex VAT
View detailsYes. That is the whole appeal of the format: your unit can be lifted by crane and relocated to another site. Just disconnect the power and transport it empty (clear the product first). For R290 pre-charged models, relocation needs no gas recovery because the circuit stays hermetic.
For a standard 20 m³ (about 6 t fully loaded), a 15 cm reinforced concrete slab poured on a compacted gravel bed is sufficient. For freezers ≥ 30 m³ with dense storage, allow 18 cm. A 10 m³ can sit on steel levelling or concrete pads provided the ground is stabilised (compacted gravel or tarmac). We supply the foundation drawings with the quote.
We deliver to France, Germany, Italy and Spain. A flat supplement of €800 to €1,800 + VAT applies depending on distance and site access. The crane lorry for unloading is included for 10 and 20 m³ units; above that, a specific quote applies (mobile crane needs above 8 t).
A 10 m³ runs on single-phase 230 V (16 A dedicated minimum, ideally 25 A). A 20 m³ and above need 3-phase 400 V (32 A for a chiller, 40 A for a freezer). If your site is not equipped, two options: a grid connection (allow 6-12 weeks plus connection cost), or a diesel generator (hire or buy). Our technical team will steer you to the best solution in the quote.
Three major differences. Lead time: 8-12 weeks for mobile, vs 4-8 months for a built room (survey, groundworks, slab, assembly, connection). Mobility: a built room is fixed property, the mobile one stays movable plant. Price: at equal volume, mobile is generally 20-35% cheaper on total cost of ownership, especially if you value lead time and flexibility.
Standard: 8 to 12 weeks depending on model and configuration (10/20 m³ catalogue, bespoke, dual-temperature or high capacity). The clock starts when we receive your 50% deposit. You get a detailed schedule with milestones: factory manufacture, loading, port arrival, customs clearance and delivery.